AFGS-87233 - Support Systems And Equipment
This specification is a guide for creating support system development specifications at the second level of indenture in the weapon system specification hierarchy, general support equipment development specifications at the second or third level of indenture, and for creating specific, performance oriented, support item development specifications.
AFGS-87253 - System Specification
AFGS-87266 - Aircraft Cockpit Transparency System (S/S By Jssg-2010)
This specification establishes the performance, development, compatibility, manufacturability, and supportability requirements and verification procedures for an Aircraft Cockpit Transparent System(ACTS) and its components.
AFGS-87267 - (
Images) Sustenance And Waste Management Systems, Airborne (S/S By Mil-Hdbk-87267)
This specification establishes the development requirements and verifications for airborne sustenance and waste management systems for the support of aircrew and passengers.
MIL-A-19531 - Aircraft: Maintenance And Engineering Inspection Requirements
This specification covers the requirements for Maintenance and Engineering Inspections of new production aircraft.
MIL-A-25165 - Aircraft Emergency Escape System, Identification Of (S/S By Mil-E-87235)
MIL-A-8591 - Airborne Stores, Suspension Equipment And Aircraft-Store Interface (Carriage Phase); General Design Criteria For (S/S By Mil-Std-8591)
This specification sets forth general structural and mechanical design criteria to which airborne stores, suspension equipment and their associated interfaces shall be designed. Provisions are included to promote cross-utilization and servicing capability among military aircraft of all services of the Department of Defense and various NATO country aircraft. Guidance is provided for design, analysis, test, and documentation of airborne stores, suspension equipment and the aircraft-store interface during captive operations. Acquisition of airborne stores and related suspension and release equipment shall be covered by a detail specification or drawing to be prepared by the contractor or acquiring activity.
MIL-A-8730 - Aircraft, General Specification For
MIL-A-8806 - Acoustical Noise Level In Aircraft, General Specification For
This specification covers the general requirements for the control of acoustical noise in occupied spaces of aircraft, including the acceptable noise levels and the testing requirements for determining conformance to these levels.
MIL-B-18364 - Bulletin, Aircraft Power Plant, Propeller, Auxiliary Power And Starting Unit, Preparation Of
MIL-B-19934 - Bulletin, Airship Envelopes, Preparation Of
MIL-C-005011 - Charts, Standard Aircraft Characteristics And Performance,Piloted Aircraft (Fixed Wing)
This specification governs the definitions of requirements for, and methods of presenting characterisitcs and performances for military piloted airplanes.
MIL-C-5011 - Chart, Standard Aircraft Characteristics And Performance, Piloted Aircraft (S/S By Mil-Std-3013)
This specification governs the definition of requirements for, and methods of, presenting characteristics and performance data for U.S. military piloted aircraft.
MIL-C-5056 - Coating, Permanent Resin; Process For Application Of, To Aircraft Parts
This specification is drawn to present detailed requirements governing the process for the application of permanent resin coating to aircraft parts other than engine parts.
MIL-C-8779 - Colors, Interior, Aircraft, Requirements For
This specification establishes the color requirements for interior surfaces of Military aircraft.
MIL-D-25671 - Data For The Airframe Sub-System Of Fixed Wing Aircraft
MIL-DTL-9490 - Flight Control Systems - Design, Installation And Test Of Piloted Aircraft, General Specification For
This specification establishes general performance, design, develop, and
MIL-F-18372 - Flight Control Systems, Design, Installation And Test Of, Aircraft (General Specification For)
This specification covers the general requirements for the design, installation, and test of flight control systems for all types of piloted aircraft contracted for by the U.S. Navy. (Power plant controls are excluded).
MIL-F-83300 - Flying Qualities Of Piloted V/Stol Aircraft
This specification contains the requirements for the flying qualities of U.S. military piloted vertical and short takeoff and landing (V/STOL) aircraft operating at speeds less than Vcon.
MIL-F-8785 - Flying Qualities Of Piloted Airplanes
This specification contains the requirements for the flying and handling qualities, in flight and on the ground, of U.S. Military, manned, piloted airplanes except for flight at airspeeds below Vcon (MIL-F-83300).
MIL-G-25607 - Galley, Aircraft, General Specifications For (S/S By Mil-G-83063)
MIL-G-25608 - Galley, Aircraft, Design Of (S/S By Mil-G-83063)
MIL-G-83063 - Galley, Aircraft, General Requirements For
MIL-H-18898 - Handbook, Aircraft Inspection Requirements (S/S By Mil-Dtl-23618)
MIL-H-27105 - Headquarter Usaf Command And Control System 473L
MIL-HDBK-23/3 - Composite Construction Flight Vehicles-Part Iii-Design Procedures (S/S By Mil-Hdbk-23)
MIL-HDBK-23 - Structural Sandwich Composites
MIL-HDBK-244 - Guide To Aircraft/Stores Compatibility
The handbook is intended to cover all aspects of aircraft/weapons compatibility: mechanical, electrical, structural, aerodynamic, etc. These are dealt with individually as they relate to various elements of the complete system. The material has been organized to present design guidelines for the five general categories of weapon system components: aircraft, suspension equipment, stores, stores management equipment, and ground support equipment. This information deals with compatibility of the components while the system is on the ground, in flight, and during weapon delivery.
MIL-HDBK-268 - Survivability Enhancement, Aircraft Conventional Weapon Threats, Design And Evaluation Guidelines
This handbook is a reference document providing uniform design and evaluation guidelines for the survivability enhancement of aircraft Mission-Essential Weapon Systems (MEWS) for the Naval Air Systems Command, to ensure that effective combat operations are achieved when operating in a conventional weapon threat environment. The design guidelines encompass signature suppression (or its control) and vulnerability reduction. Those elements and design activities that are related to survivability enhancement, but are derived from the degradation of threat subsystem functions (e.g., electronic warfare) or from the ways that the aircraft can be utilized in a hostile environment (e.g., tactics) are not included. The evaluation guidelines, for the purpose of achieving systematic quantification and evaluation of combat survivability, include definition of mission scenario and associated threat environment, vulnerability to threat damage mechanisms, encounter survivability, and survivability enhancement trade-offs.
MIL-HDBK-273 - Survivability Enhancement, Aircraft, Nuclear Weapon Threat, Design And Evaluation Guidelines
This handbook is a reference document providing uniform design and evaluation guidelines for the survivability enhancement of aircraft Mission-Essential Weapons Systems (MEWS), within or for the Naval Air Systems Command, to ensure that effective combat operations are achieved when operating in a nuclear threat environment. Those elements and design activities that are related to survivability enhancement but are derived from the degradation of threat subsystem functions (e.g. electronic warfare) or from the ways that the aircraft can be utilized in a hostile environment (e.g. tactics) are not included. The evaluation guidelines, for the purpose of achieving systematic quantification and evaluation of combat survivability, include definition of mission scenario and associated threat environment, vulnerability to threat damage mechanisms, encounter survivability, and survivability enhancement trade-offs.
MIL-HDBK-1530 - Aircraft Structural Integrity Program, General Guidelines for (S/S by MIL-STD-1530)
This handbook contains general guidelines for the U.S. Air Force Aircraft Structural Integrity Program (ASIP). These guidelines describe the processes proven successful in the achievement of structural integrity in USAF air vehicles while the cost of ownership is minimized; and cost and schedule risks managed through a series of disciplined, time-phased tasks. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
MIL-STD-1796 - Avionics Integrity Program (AVIP)
This standard identifies the design tasks needed to achieve high reliability, long life, safe operation and supportability of aviation electronics in operational environments.
MIL-HDBK-87244 - Avionics/Electronics Integrity
This handbook provides rationale, guidance, and lessons learned for specific avionics/electronics applications and parallels the sample performance specification in Appendix C. This handbook describes the Avionics/Electronic Integrity Process (AVIP) and associated performance requirements which should be tailored and incorporated into appropriate contractual documents and the integrated engineering and manufacturing process to achieve integrity of airborne and ground-based electronics. The suggested performance requirements assist in the development 01 program performance and verification requirements which encompass equipment life, life-cycle uses, environments and supportability. The AVIP process enhances systems engineering . In the design and production of affordable and reliable avionic/electronics. Previous versions have been successfully tailored and applied by large and small acquisition programs.
MIL-I-18259 - Installation Of Window Anti-Icing, De-Greasing, And Washing Systems (General Specification For) (S/S By Sae-As18259)
This specification covers the general requirements for the design and installation of fluid anti-icing, degreasing, and washing systems installed in military aircraft.
MIL-I-18464 - Insignia And Markings For Naval Weapons Systems (S/S By Mil-Std-2161)
This specification establishes the requirements for the insignia and markings to be applied to the exterior surfaces of all heavier-than-air Naval and Marine Corps weapons systems, as well as those procured for other government agencies and foreign countries under Navy contracts, in accordance with the directives of the Chief of Naval Operations.
MIL-M-18012 - Markings For Aircrew Station Displays Design And Configuration Of (S/S By Sae-As18012)
This specification covers the design requirements and configuration of letters, numerals,and identification for aircrew station displays and control panels.
MIL-M-25047 - Markings And Exterior Finish Colors For Airplanes, Airplane Parts, And Missiles (Ballistic Missiles Excluded)
MIL-M-27733 - Modification And Marking Procedures For Test Equipment In Aerospace Vehicles (Class Ii Modification) (S/S By Mil-Std-27733)
MIL-S-5711 - Structural Criteria, Piloted Airplanes Structural Tests, Flight (S/S By Mil-A-8871)
MIL-S-58077 - Safety Engineering Of Aircraft Systems, Associated Subsystems, And Equipment, General Requirements For (Use Mil-S-38130)
MIL-STD-1288 - Aircrew Protection Requirements Nonnuclear Weapons Threat
The purpose of this document is to establish the design of protection systems, as defined herein, to protect aircrews from the threats posed by enemy nonnuclear weapons.
MIL-STD-1290 - Light Fixed And Rotary-Wing Aircraft Crash Resistance
This document establishes minimum crash resistance criteria for implementation in the initial stages of aircraft system design.
MIL-STD-1333 - Aircrew Station Geometry For Military Aircraft
The requirements defined herein apply to all piloted aircraft acquired by the Military Services.
MIL-STD-1374-1 - Group Weight Statement (Vellum) (Issue Controlled)
MIL-STD-1374-2 - Detail Weight Statement (Vellum) (Issue Controlled)
MIL-STD-1374-3 - Weight And Balance Status (Vellum) (Issue Controlled)
MIL-STD-1374 - Weight And Balance Data Reporting Forms For Aircraft (Including Rotorcraft) (S/S By Sawe-Rp8)
This document covers standard weight statements and forms Parts I, II, and III hereof, for procurement of weight and balance data for aircraft (including rotocraft), states the principles where necessary for uniform compilation of the required weight and descriptive data, and provides a glossary of terms for which definitions may not be self-evident on the weight statements and forms.
MIL-STD-1530 - Aircraft Structural Integrity Program (Asip)
This standard describes the USAF Aircraft Structural Integrity Program (ASIP) which defines the requirements necessary to achieve structural integrity in USAF aircraft while managing cost and schedule risks through a series of disciplined, time-phased tasks. It provides direction to government personnel and contractors engaged in the development, production, modification, acquisition, and/or sustainment of USAF aircraft.
MIL-STD-1789 - Sound Pressure Levels In Aircraft (S/S By Mil-Std-1474)
This standard provides human engineering criteria for maximum allowable sound pressure levels in crew and passenger compartments of all United States Air Force (USAF) aircraft.
MIL-STD-1797 - Flying Qualities Of Piloted Aircraft
This standard contains the requirements for the handling qualities, in flight and on the ground, of US military piloted air vehicles. It is intended to assure flying qualities that provide adequate mission performance and flight safety regardless of design or flight control system mechanization. The structure of the standard allows its use to guide these aspects in design tradeoffs, analyses, and tests.
MIL-STD-1799 - Survivability, Aeronautical Systems (For Combat Mission Effectiveness (S/S By Mil-Hdbk-1799)
This standard defines tasks and requirements for programs to establish the survivability characteristics of aeronautical systems and maintain them throughout the system life cycle.
MIL-STD-1807 - Crash Survivability Of Aircraft Personnel (Release To Other Than Dod Activity Require Prior Approval Of Asd/Enes, Wright-Patterson Afb Oh 45433-6503) (S/S By Jssg-2010)
This standard provides reference document of general performance and verification requirements to reduce the potential for injury and death to aircraft occupants as a result of an air vehicle crash.
MIL-STD-2069 - Requirements For Aircraft Nonnuclear Survivability Program (S/S By Mil-Hdbk-2069)
MIL-STD-2072 - Survivability, Aircraft, Establishment And Conduct Of Programs For
MIL-STD-2089 - Aircraft Nonnuclear Survivability Terms (No S/S Document, See Mil-Hdbk-2089 For Guidance)
MIL-STD-411 - Aircrew Station Alerting Systems
This standard covers aircraft aircrew station alerting systems including general functions, operational logic; information content of messages; and physical characteristics of the alerting system's visual, auditory, and tactile signals.
MIL-STD-707 - Air Permeability Fineness (S/S By Mil-Std-1233)
MIL-STD-850 - Aircrew Station Vision Requirements For Military Aircraft
The purpose of this document is to establish requirements for providing adequate external vision from within the aircrew stations of military aircraft.
MIL-STD-872 - Test Requirements And Procedures For Aircraft Emergency Ground And Ditching Escape Provisions
This standard prescribes uniform testing requirements and procedures to be used for evaluating aircraft emergency ground and ditching escape provisions utilizing full-scale mockup.
MIL-T-7791 - Towing And Mooring Gear, Seaplane, Flying Boat, And Amphibian, Design And Installation Of
MIL-T-81259 - Tie-Downs, Airframe Design, Requirements For
This specification defines the design and construction requirements for Naval Aircraft Tie-Down Fittings, Attachment Points, and the associated aircraft carry-through structures.
MIL-W-25140 - Weight And Balance Control System (For Aircraft And Rotorcraft) (S/S By Sawe-Rp7)
This specification covers the requirements for Weight and Balance Control Systems to provide for the management of mass characeristics program and to facilitate the preparation and submission of data in standard format during the life of an aircraft or rotorcraft contract.
MS33542 - ( Images) Criteria-Temperature And Altitude Range Blast Cooled Electric Equipment
MS33543 - ( Images) Criteria Temperature And Altitude Range Self Cooled Electric Equipment
MS33568 - Drive, Square Mounting Flante With Involute Spline-Pinion
MS33569 - Drive, Round Mounting Flange With Involute Spline-Pinion
MS33570 - Drive, Square Mounting Flange With Round Shaft And Key
MS33571 - ( Images) Drive, Round Mounting Flange With Round Shaft And Key
MS33739 - ( Images) Aircraft Markings, Servicing And Precautioning (Asg) (S/S By Mil-Std-2161)
MS90327 - ( Images) Aircraft Markings, Access Numbering System
QPL-5027-20 - Valves, Check, Oxygen, High Pressure (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5435-2 - Cylinder, Oxygen, Low Pressure, Portable Type A-6
QPL-5436-2 - Cylinder, Oxygen, Low Pressure, Type B-3
QPL-5484-1 - Heater, Aircraft, Combustion-Type
QPL-5887-3 - Cylinder, Oxygen, Low Pressure, Type D-2
QPL-5888-2 - Cylinder, Oxygen, Low Pressure, Type F-1
QPL-5889-1 - Cylinder, Oxygen, Low Pressure, Type F-2
QPL-5890-3 - Cylinder, Oxygen, Low Pressure, Type G-1
QPL-5891-1 - Cylinder, Oxygen, Low Pressure, Type J-1
QPL-6017-12 - Hose Assembly, Low Pressure, For Breathing Oxygen
QPL-6482-8 - Mask Assemblies, Oxygen, Pressure Breathing
QPL-6650-5 - Converter, Liquid Oxygen, Aircraft, Type A-2
QPL-7025-5 - Hose Assembly, Oxygen Breathing And Radio, Connector To Regulator
QPL-7138-13 - Hose Assembly, Oxygen-Breathing Connector To Regulator
QPL-7407-11 - Converter, Liquid To Gaseous Oxygen, Aircraft, Type A-3
QPL-7529-2 - Valve, Low Pressure, Oxygen Line
QPL-7560-18 - Valve Assembly, Oxygen Cylinder, Bailout (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7605-15 - Regulator, Oxygen, Demand, Pressure Breathing, Type A-21 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7773-1 - Joint, Oxygen Swivel, Low Pressure
QPL-7891-9 - Filler Valve, Aircraft Oxygen (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7905-52 - Cylinders, Steel, Compressed Gas, Non-Shatterable Seamless, 1800 Psi And 2100 Psi (Replaced By The Qualified Products Database (Qpd) See Notice 3 For Additional Information)
QPL-7908-1 - Valve, Low Pressure Oxygen Check
QPL-7944-3 - Indicator, Oxygen Flow
QPL-8057-11 - Valve, Oxygen, Pressure Build-Up And Vent
QPL-81018/2-1 - Survival Kit Container, Aircraft Seat, With Oxygen-Rssk-8
QPL-81387-10 - Indicators, Liquid Oxygen Quantity
QPL-81388-10 - Indicator Repeaters, Liquid Oxygen Quantity
QPL-81552-10 - Valve, Exhalation, Oxygen Mask, Pressure Compensating, With Safety Relief
QPL-81553-20 - Regulator, Chest Mounted, Positive Pressure, Cru-79/P
QPL-81581/1-13 - Hose Assemblies, Air, Low Pressure, Highly Flexible
QPL-81581/2-12 - Hose Assemblies, Breathing Oxygen, High Pressure, With Connections For An Integrated Communication System
QPL-81581/3-16 - Hose Assemblies, Breathing Oxygen, High Pressure Without Connections For Communication System
QPL-81581/4-11 - Hose Assemblies, Breathing Oxygen, Low Pressure, With/Without Connections For Intergrated Communication System
QPL-81581/5-10 - Hose Assemblies, Breathing Oxygen, Low Pressure Connector To Regulator
QPL-81581/6-10 - Hose Assemblies, Breathing Oxygen And Air; Hose Kits And Mated Assemblies
QPL-81581/7-10 - Hose Assemblies, Combined Assemblies, Hose And Communication Cable
QPL-81581/8-12 - Hose Assemblies, Cable Assemblies, Communication, Associated
QPL-8291-1 - Converter, Oxygen, Aircraft, Liquid To Gaseous Type Mb-2
QPL-83178-13 - Regulator, Oxygen, Diluter-Demand, Automatic-Pressure-Breathing, Cru-73A General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83862-2 - Strap, Retention, Survival Kit
QPL-83863-2 - Spacer Assembly, Survival Container Parachute Support
QPL-83864-2 - Survival Kit Inner Container
QPL-83865-2 - Cushion, Seat, Survival Container
QPL-83866-4 - Receiver, Oxygen Mask, Assembly Of (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83867-3 - Connector, Oxygen Mask Hose-Non-Ejection Type (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83869-2 - Mask Assembly, Oxygen, Fire Fighter'S
QPL-8622-3 - Valve, High-Pressure, Oxygen-Cylinder Automatic Opening (Aeronautical Use)
QPL-8636-7 - Regulator, Automatic Continuous Flow Oxygen
QPL-87113-2 - Mask, Oxygen, Mbu-10/P
QPL-9057-1 - Regulator, Diluter Demand, Oxygen, Type A-15
QPL-9338-3 - Regulator, Oxygen, Demand, Type A-13
QPL-9370-27 - Valve, Automatic, Pressure Regulating, Anti-G Suit (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-9439-4 - Valve, Oxygen, Cylinder, High Pressure
QPL-9494-2 - Regulator, Oxygen, Diluter, Demand, Automatic Pressure Breathing, High Pressure, Type Mb-2
heck, For 70-Psi Oxygen Converter Systems
MIL-V-25559 - Valve, Reduction, Oxygen
MIL-V-26394 - Valve, Oxygen, Pressure Buildup And Vent
MIL-V-27296 - Valve, Oxygen Mask, Combination Inhalation And Exhalation
This Specification covers a pressure-compensating inhalation valve, for use with oxygen mask assemblies MBU-5/P and MBU-12/P.
MIL-V-27852 - Valve, Filler, Liquid Nitrogen Nru-1/A
MIL-V-38224 - Valve, Oxygen, On-Off Cru-18/A
MIL-V-5064 - Valve, Regulating, Jet Type Aircraft, Anti (G) Suit (S/S By Mil-V-9370)
MIL-V-6607 - Valve, Oxygen Pressure Reduction (S/S By Mil-V-18318)
MIL-V-7553 - Valve, Oxygen Mask, Inlet Check
MIL-V-8965 - Valve Core, Oxygen, High Pressure
MS16052 - Air Inlet, Combat Aircraft, Ground Cooling
MS17269 - Blower, D.C. Brushless, Continuous Duty, Garment Ventilation, Mark 5, Anti-Exposure Suit
MS21227 - Cylinder, Oxygen, Low Pressure (S/S By Mil-C-5886/1)
MS21964 - Valve Assembly Emergency Oxygen Cylinder (S/S By Mil-Dtl-7560/1)
MS21965 - Nipple, Break Off, Emergency Oxygen Cylinder Valve (S/S By Mil-Dtl-7560/1)
MS22001 - Mask Assemblies, Oxygen, Pressure Breathing
MS22016 - Connector, Oxygen Mask Hose, Type Mc-3A
MS22032 - Recharger Assembly, Portable Oxygen (Asg)
MS22052 - Hose Assembly - Oxygen Low Pressure
MS22053 - Blower, 400 Cps, Continuous Duty, Class A, Garment Ventilation, Cwu-33/P Anti-Exposure Suit
MS22057 - Delamination Test Stand For Oxygen Hose (Asg)
MS22058 - Connector, Oxygen Hose To Regulator
MS22059 - Oxygen System, Portable, 295 Cu Inch High Pressure, Aircraft
MS22061 - Oxygen System, Portable, 96 Cu Inch High Pressure, Aircraft
MS22062 - Regulator, Oxygen, Diluter Demand, Automatic, Pressure Breathing
MS22066 - Valve, Check, Oxygen Charging (S/S By Mil-Prf-7891)
MS22068 - Coupling Assemblies, Quick Disconnect, Aircraft Liquid Oxygen Systems
MS22069 - Cylinder Assembly, Emergency Oxygen
MS22070 - Gasket, Valve, Male
MS22075 - Adapter, Valve, Male
MS24350 - Valve, Automatic Pressure Regulating Anti-G Suit
MS24552 - Tubing Assembly, Oxygen Mask To Regulator (S/S By Ms 22055)
MS26545 - Cylinders; Steel; Compressed Gas; Non-Shatterable; Seamless; 1800 Psi, And 2100 Psi
MS27465 - Regulator, Oxygen, Diluter Demand
MS27566 - Cap Assembly, Liquid Oxygen Fill Valve
MS27599 - Regulator, Oxygen, Diluter Demand (S/S By Mil-Prf-83178)
MS27796 - Connector-Bayonet, Three Pin, Oxygen Mask
MS28140 - Connector, Oxygen Mask To Regulator, Type Mc 3A (S/S By Ms22016 )Asg()
MS29597 - Controller, Oxygen Flow Emergency Cylinder Valve (S/S By Mil-Dtl-7560/1)
MS90326 - Flow Control Assembly, Quick Disconnect, Cwu-33/P Anti-Exposure Suit
MS90330 - Servicing Adapter Low Pressure Oxygen
MS90331 - Servicing Adapter High Pressure Oxygen
MS90339 - Hose Assembly, Oxygen Mask To Connector
MS90340 - Insert, Installation And Detail, Full Face Oxygen And Smoke Masks
MS90341 - Mounting Bracket, Configuration, Mating Portion For 5 And 10 Liter Liquid Oxygen Converters
MS90342 - Nut Assembly (Grooved Washer And Detented Wing)
MS90389 - Cylinder, Oxygen, Non Shatterable, Welded, 180
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business